linear guideway MGW12H hiwin linear guide
Specifications
HIWIN linear guide rail / linear guide
1.Rolled and grounded both have.
2.Grade is N,H,P
3.Rail max length 4000mm
Features of MGW-O Series
Design features of wide type miniature guideways- MGW:
1. The enlarged width design increases the capacity of moment loading.
2. Gothic arch contact design has high rigidity characteristic in all directions.
3. S teel balls are held by a miniature retainer to keep balls from falling out, even when the blocks are removed from the rail.
4. All metallic components are made of stainless steel for anti-corrosion.
Features:
Linear guide application
1. Machining center
2. Machine tools
3. Precision processing
4. Heavy cutting tools
5. Marble cutting machine
6. Grinder
7. Injection machine
8. Punch
9. Automation devices
10. Transportation equipment
11. Measurement instrument
(1) High positional accuracy
When a load is driven by a linear motion guideway, the frictional contact between the load and the bed desk is rolling contact. The coefficient of friction is only 1/50 of traditional contact, and the difference between the dynamic and the static coefficient of friction is small. Therefore, there would be no slippage while the load is moving.
(2) Long life with high motion accuracy
With a traditional slide, errors in accuracy are caused by the counter flow of the oil film. Insufficient lubrication causes wear between the contact surfaces, which become increasingly inaccurate. In contrast, rolling contact has little wear;therefore, machines can achieve a long life with highly accurate motion.
(3) High speed motion is possible with a low driving force
Because linear guideways have little friction resistance, only a small driving force is needed to move a load. This
results in greater power savings, especially in the moving parts of a system. This is especially true for the reciprocating parts.
(4) Equal loading capacity in all directions
With this special design, these linear guideways can take loads in either the vertical or horizontal directions.
Conventional linear slides can only take small loads in the direction parallel to the contact surface. They are also more likely to become inaccurate when they are subjected to these loads.
(5) Easy installation
Installing a linear guideway is fairly easy. Grinding or milling the machine surface, following the recommended
installation procedure, and tightening the bolts to their specified torque can achieve highly accurate linear motion.
(6) Easy lubrication
With a traditional sliding system, insufficient lubrication causes wear on the contact surfaces. Also, it can be quite
difficult to supply sufficient lubrication to the contact surfaces because finding an appropriate lubrication point is
not very easy. With a linear motion guideway, grease can be easily supplied through the grease nipple on the linear guideway block. It is also possible to utilize a centralized oil lubrication system by piping the lubrication oil to the piping joint.
(7) Interchangeability
Compared with traditional boxways or v-groove slides, linear guideways can be easily replaced should any damage occur. For high precision grades consider ordering a matched, non-interchangeable, assembly of a block and rail.
HIWIN linear guide series:
HG series: grinders, milling machines, lathes, drilling machines, processing machines, EDM machines, boring machines, wire cutting, precision measuring equipment, woodworking machines, handling machines, conveyor.
EG series: industrial automation machinery, semiconductor machine, laser engraving machine, packaging machine.
MGN / MGW series: printer, robotics, electronic equipment, semiconductor equipment.
Feather of Taiwan HIWIN linear guide rail / linear guide
| Brand name |
HIWIN |
| Mode |
Taiwan HIWIN HGH,HGW,EGH,EGW,MGN,MGW,RGH & RGW series |
| Width |
Diameter: 7mm-65mm |
| Pitch |
Length:0mm-6000mm |
| Accuracy |
Grade C,H,P,SP,UP |
| Preload code |
Z0,ZA,ZB |
| Material |
Stainless steel (high rigidity) |
| Performance |
Long life, low noise and easy setting up |
| Service |
We could machine end ball screw by our costumer drawings |
| Payment terms |
A:By T/T, Western Union |
| B:Bank account |
| |
| Fob port |
Shenzhen/HK/Guangzhou port |
| Taiwan HIWIN HGH..CA & HGH..HA series linear guide model |
| HGH15CA |
HGH20CA |
HGH20HA |
HGH25CA |
HGH25HA |
HGH30CA |
HGH30HA |
| HGH35CA |
HGH35HA |
HGH45CA |
HGH45HA |
HGH55CA |
HGH55HA |
HGH65CA |
| HGH65HA |
|
|
|
|
|
|
| Taiwan HIWIN HGW..CC & HGW..HC series linear guide model |
| HGH15CC |
HGH20CC |
HGH20HC |
HGH25CC |
HGH25HC |
HGH30CC |
HGH30HC |
| HGH35CC |
HGH35HC |
HGH45CC |
HGH45HC |
HGH55CC |
HGH55HC |
HGH65CC |
| HGH65HC |
|
|
|
|
|
|
| Taiwan HIWIN EGH..SA & EGH..CA series linear guide model |
| EGH15SA |
EGH15CA |
EGH20SA |
EGH20CA |
EGH25SA |
EGH20CA |
EGH30SA |
| EGH30CA |
|
|
|
|
|
|
| Taiwan HIWIN EGW..SA & EGW..CA series linear guide model |
| EGW15SA |
EGW15CA |
EGW20SA |
EGW20CA |
EGW25SA |
EGW20CA |
EGW30SA |
| EGH30CA |
|
|
|
|
|
|
| Taiwan HIWIN MGN & MGW series Miniature linear guide |
| MGN7C |
MGN7H |
MGN9C |
MGN9H |
MGN12C |
MGN12H |
MGN15C |
| MGN15H |
|
|
|
|
|
|
| MGW7C |
MGW7H |
MGW9C |
MGW9H |
MGW12C |
MGW12H |
MGW15C |
| MGW15H |
|
|
|
|
|
|
| Taiwan HIWIN RGH & RGW series Miniature linear guide |
| RGH25CA |
RGH25HA |
RGH35CA |
RGH35HA |
RGH45CA |
RGH45HA |
RGH55CA |
| RGH55HA |
|
|
|
|
|
|
| RGW25CA |
RGW25HA |
RGW35CA |
RGW35HA |
RGW45CA |
RGW45HA |
RGW55CA |
| RGW55HA |
|
|
|
|
|
|
Audited Supplier 
){kind=link}